Dimension Aligned

Umarnin dimaligned yana sanya girma-girma wanda ke auna nisan kai tsaye na gaskiya tsakanin tabo biyu. Layin girma-girma yana gudana daidaici da layin da ke haɗa tabo biyun, don haka zai iya kasancewa a kowace kusurwa. Wannan shine babban bambanci daga Dimension Linear, wanda aka iyakance zuwa a kwance ko a tsaye.

Yanayin girma-girma mai daidaici

     ●  p2
    /|
   / |  (ext line 2, ta hankalta a kan dim line)
  /  |
 /←5.00→/
/  /
●  /  (ext line 1, ta hankalta a kan dim line)
p1
  • Layukan extension — ta hankalta a kan layin girma-girma, an zana daga kowace tabo da ake auna.
  • Layin girma-girma — daidaici da p1→p2, an motsa zuwa gefe ɗaya ta matsayin mai nuni.
  • Ƙima — nisan Euclidean na gaskiya |p1 – p2|.

Sanya girma-girma mai daidaici

  1. Rubuta dimaligned a tashar umarni ko danna maɓallin kayan aiki na Dimension Aligned.
  2. Danna asalin layin extension na farko (p1), ko rubuta X,Y ka danna Enter don daidaitawa madaidaiciya.
  3. Danna asalin layin extension na biyu (p2). Shigar da daidaitawa yana aiki a nan ma.
  4. Motsa mai nuni zuwa gefe ɗaya don saita motsi na hankalta na layin girma-girma.
  5. Danna don sanyawa, ko rubuta nisan motsi ka danna Enter don sanya wuri madaidaici.

Nisan motsi da aka rubuta

Rubuta lamba yayin sanyawa don kwaɓe layin girma-girma a nisa madaidaici ta hankalta daga layin p1→p2:

MaɓalliAiki
0–9, .Ƙara lamba zuwa motsi
BackspaceShare tsohon harafi na ƙarshe da aka rubuta
Enter / SpaceSanya a motsi da aka rubuta

Gefen mai nuni yana bayyana wace gefe layin girma-girma zai bayyana a kai.

Marfe na maɓallan madannai

MaɓalliAiki
0–9, ., -Fara shigar da daidaitawar X (matakan p1/p2), ko nisan motsi (mataki na sanyawa)
,Kulle X ka koma shigar da Y (matakan p1/p2)
BackspaceShare tsohon harafi na ƙarshe da aka rubuta
Enter / SpaceTabbatar da daidaitawa ko motsi da aka rubuta
EscapeSoke

Dimension Aligned da Dimension Linear

Dimension AlignedDimension Linear
Kusurwar layin girma-girmaDaidaici da p1→p2 — kowace kusurwaKoyaushe a kwance ko a tsaye
Yana aunawaNisan Euclidean na gaskiyaSashen X ko Y kaɗai
Kulle-shugabanci H/VAʼaEh — maɓallan H da V
Mafi kyau donFasaloli na diagonal, yankewa a kusurwaLayouts na orthogonal, sassa masu daidaici da grid

Gyara alamar — simple mode

Danna sau biyu girma-girma mai daidaici da aka sanya don buɗe naʼurar gyaran rubutu a simple mode. An riga an cika naʼurar da ƙimar da ake nunawa yanzu don ka iya sanya mai nuni ka gyara ta kai tsaye.

FasaliHali
Bold / Italic / Font / HeightYana shafar dukkan alamar lokaci guda
Tsari na kowane harafiBa a goyon baya
EnterYana tabbatar da ƙima ya rufe naʼurar
Layi da yawaBa a goyon baya

Duba Naʼurar Gyaran Rubutu — simple mode don cikakken bayani.

Sarƙar girma-girma

Don ƙara girma-girma ƙari da ke ci gaba daga layin extension na biyu na wannan, yi amfani da Dimension Continue — yana kulle zuwa kusurwar awo iri ɗaya kamar wannan girma-girma mai daidaici.

DXF — Abin DIMENSION (nauʼin daidaici)

Girma-girma mai daidaici ana ajiye su a matsayin abubuwan DIMENSION tare da dimType = 1 (daidaici). Asalin layukan extension, matsayin layin girma-girma, matsayin rubutu, ƙimar da aka aunata, juyawa, salon kibiya, da dukkan flags na nuni suna juyawa ba tare da asara ba.