Dimension Continue

Umarnin dimcontinue yana sarƙar sabbin girma-girma daga layin extension na biyu na girma-girma da ke akwai. Ana sanya kowane sabon sashi a kan axis na awo iri ɗaya kuma a motsi na layin girma-girma iri ɗaya kamar tushe. Ana kwafi dukkan abubuwan salo — girman kibiya, tsayin rubutu, tsawon layukan extension — daga tushe kai tsaye.

Yadda girma-girma masu sarƙa suke kama

  |←— 3.00 —→|←— 2.50 —→|←— 4.00 —→|
  |           |           |           |
  ●           ●           ●           ●
  p1        p2 (tushe    p3           p4
           ext2 → sabon farawa)

Kowace murabbaʼi abin DIMENSION daban ne. Suna raba matsayin layin girma-girma da shugabancin awo iri ɗaya.

Fara sarƙa

Rubuta dimcontinue a tashar umarni ko danna maɓallin kayan aiki na Dimension Continue.
Idan girma-girma an sanya shi yanzu-yanzu — umarnin yana ɗauke shi kai tsaye a matsayin tushe (babu bukatar dannawa).
Idan babu girma-girma na kwanan nan — danna kowace girma-girma da ke akwai don yin amfani da ita a matsayin tushe.
Danna asalin layin extension na gaba — preview yana nuna sabon girma-girma yayin da kake motsa mai nuni. Ko rubuta X,Y ka danna Enter don daidaitawa madaidaiciya.
Ci gaba da dannawa (ko rubutu) don tsawaita sarƙa. Kowace girma-girma da aka sanya ta zama sabon tushe kai tsaye.
Danna Enter, Space, ko Escape don kammala sarƙa.

Abin da ake gado daga girma-girma tushe

Abu	An gada daga tushe
Shugabanci/kusurwar awo	Eh — an kulle ga dukkan sarƙa
Motsi na layin girma-girma (nisa daga tabon da ake aunawa)	Eh
Girman kibiya	Eh
Tsayin rubutu	Eh
Motsi da tsawon layin extension	Eh
Daidaiton rubutu	Eh
Sunan salo	Eh
Launi, Layer	Ba a gada ba — yana amfani da layer na yanzu

Kulle-shugabanci na awo

Shugabancin awo na sarƙar an kwaɓe zuwa kusurwar girma-girma tushe:

Tushe na layi (H) → dukkan ci-gaba suna auna nisa a kwance (Δ X).
Tushe na layi (V) → dukkan ci-gaba suna auna nisa a tsaye (Δ Y).
Tushe mai daidaici a kowace kusurwa → dukkan ci-gaba suna auna a kan wannan kusurwar iri ɗaya.

Ba za ka iya canza shugabanci a tsakiyar sarƙa ba. Fara sabon Dimension Linear ko Dimension Aligned don auna a wani shugabanci daban.

Marfe na maɓallan madannai

Maɓalli	Aiki
`0`–`9`, `.`, `-`	Fara shigar da daidaitawar X
`,`	Kulle X ka koma shigar da Y
`Backspace`	Share tsohon harafi na ƙarshe da aka rubuta
`Enter`	Tabbatar da daidaitawa da aka rubuta, ko kammala sarƙa idan babu shigarwa a tsari
`Space` / `Escape`	Kammala sarƙa

Dimension Continue da sabon farawa

	Dimension Continue	Dimension Linear / Aligned
Tabon farawa	An kwaɓe a ext2 na tushe na ƙarshe	Danna a ko’ina
Kusurwa	An kulle zuwa tushe	Kyauta
Motsi	An gada daga tushe	An saita ta mai nuni ko rubutu
Salo	An gada daga tushe	Salo na yanzu
Mafi kyau don	Awo masu tarawa a jere	Girma-girma na farko ko canza shugabanci

Gyara alamomi bayan sanyawa — simple mode

Danna sau biyu kowace girma-girma a sarƙa don buɗe naʼurar gyaran rubutu a simple mode. Kowane sashi mai zaman kansa ne kuma ana iya gyara shi daban.

Fasali	Hali
Bold / Italic / Font / Height	Yana shafar dukkan alamar lokaci guda
Tsari na kowane harafi	Ba a goyon baya
`Enter`	Yana tabbatar da ƙima ya rufe naʼurar
Layi da yawa	Ba a goyon baya

Duba Naʼurar Gyaran Rubutu — simple mode don cikakken bayani.

DXF — Abubuwan DIMENSION

Kowane sashi a sarƙar ana ajiye shi a matsayin abin DIMENSION mai zaman kansa a fayil ɗin DXF. Ba a haɗa su a fayil ɗin ba — suna raba abubuwa domin an ƙirƙira su daga tushe iri ɗaya, amma kowane ana iya gyara shi daban bayan sanyawa.