Text

Umarnin text yana sanya alamar rubutu mai layi da yawa. Bayan ka danna matsayi a kan canvas, naʼurar gyaran popup tana buɗewa a rich mode — za ka iya rubuta abin ciki, yi amfani da mai-nauyi/karkatacce/kan-tsallake ga kowane harafi, canza fonts da tsayi, da sanya karyewar layi. Danna Escape don tabbatarwa ka rufe naʼurar.

Duba shafin Naʼurar Gyaran Rubutu don cikakken bayanin editan, ciki har da kwatance na yanayin rich da simple.

Sanya alamar rubutu

Rubuta text a tashar umarni ko danna maɓallin kayan aiki na Text.
Danna matsayin anchor a kan canvas. Ko rubuta X,Y ka danna Enter don daidaitawa madaidaiciya.
Popup na naʼurar gyaran rubutu yana buɗewa a saman sabuwar alama. Rubuta abin cikinka.
Danna Escape don tabbatar da alamar ka rufe naʼurar.

Tsayi na tsoho shine 12 unit na zane.

Gyara alama da ke akwai

Danna sau biyu kowace alamar rubutu a kan canvas don sake buɗe naʼurar ga wannan alamar.

Shigar da daidaitawa ga anchor

Maimakon dannawa, rubuta matsayi madaidaici:

Rubuta ƙimar X.
Danna , — tashar umarni tana nuna [X], [Y{cursor}].
Rubuta ƙimar Y.
Danna Enter don sanya anchor ka buɗe naʼurar.

Marfe na maɓallan madannai

Mataki na anchor

Maɓalli	Aiki
`0`–`9`, `.`, `-`	Fara shigar da daidaitawar X
`,`	Kulle X ka koma shigar da Y
`Backspace`	Share tsohon harafi na ƙarshe da aka rubuta
`Enter`	Tabbatar da daidaitawar da aka rubuta

Mataki na naʼurar gyaran rubutu (duba Naʼurar Gyaran Rubutu don cikakken bayani)

Maɓalli	Aiki
Kowane haruf mai buga	Sanya a mai nuni
`Backspace` / `Delete`	Share haruf makwabta ko zaɓi
`Enter`	Sanya karyewar layi
`←` / `→`	Motsa caret
`Home` / `End`	Kai zuwa farko / ƙarshe na layi kashi
`Escape`	Tabbatarwa ka rufe naʼurar

Gyaran grip — sake matsayi

Alamar rubutu da aka zaɓa yana nuna grip ɗaya a tabon anchor:

Grip	Matsayi	Aikinsa
Anchor	Hagu-ƙasa na rubutu	Ja don sake matsayin alama

Zaɓen rubutu

Hanya	Hali
Danna	Yana zaɓe idan dannawa ta kasance cikin akwatin dubawa mai juyawa na rubutu
Ja dama (mai tsauri)	Dukkan kusurwoyi huɗu na akwatin dubawa dole ne su kasance cikin yankin zaɓi
Ja hagu (mai haɗuwa)	Kowace haɗuwa tsakanin akwatin dubawa na rubutu da yankin zaɓi yana zaɓen ta

Umarnin gyara da ake goyon baya

Umarni	Abin da ke faruwa da rubutu
Move	Yana motsa tabon anchor
Copy	Yana ƙirƙirar alama iri ɗaya a sabon matsayi
Rotate	Yana juya matsayin anchor kuma yana ƙara kusurwar zuwa Rotation Degree
Mirror	Yana yin madubi na tabon anchor a kan axis na madubi (mahrukin rubutu ba a juye shi ba)
Scale	Yana canza girman matsayin anchor kuma yana ninka tsayin da abin girma
Delete	Yana cire alama

Text ba ta goyon bayan Offset, Trim, ko Extend ba.

Abubuwan

Idan alamar rubutu ya zaɓa, panel na abubuwa yana nuna:

Gaba ɗaya

Abu	Tsoho	Ma’ana
Launi	256 (ByLayer)	Alamar launi ta ACI
Layer	`0`	Sanya layer

Geometry

Abu	Ma’ana
Position X / Position Y	Daidaitawar tabon anchor
Height	Tsayin rubutu na asali a unit na zane (tsoho: 12)
Rotation Degree	Juyawa nagaba-da-kusurwar-agogo a digiri

Abubuwan

Abu	Ma’ana
Content	Mahrukin rubutu (ana kiyaye kodun MTEXT a ciki)
Attachment Point	Lambar daidaitawa (1 = hagu-sama … 9 = dama-ƙasa)

Text ba ta da abubuwan Linetype, Linetype Scale, ko Thickness.

DXF — Abin MTEXT

Alamun rubutu ana ajiye su a matsayin abubuwan MTEXT a fayil ɗin DXF. Ana kodada mai-nauyi da karkatacce ta amfani da \L, \K, \O, da sauya font a ciki (\f). Ana kodada tsayi ga kowane harafi a matsayin \H. Dukkan tsari yana wanzuwa a cikakken juyawar DXF kuma ana iya karanta shi ta LibreCAD, FreeCAD, da wasu manhajoji masu dacewa da DXF.